Sadoun Customer Service & Order Hotline: 1-888-519-9595

+ Reply to Thread
Page 1 of 2
1 2 LastLast
Results 1 to 10 of 12

Thread: Conical Scalar Ring

  1. #1
    New Member Newbie adamsphoto is on a distinguished road
    Join Date
    Feb 2008

    Posts
    4
    Rep Power
    0

    No more Conical Scalar Rings?

    I noticed today that the conical scalar rings have been removed from the Sadoun web site... should we assume that these are gone forever and never to be seen again? If so, please will one of the members here step up to the plate and make some detailed measurements for the one on their dish so I and others can have one made?

  2. #2
    Bored Member Rising Star lumpkin666 is on a distinguished road
    Join Date
    Feb 2007

    Posts
    174
    Rep Power
    130
    As long as I've been a member, they've been "coming soon". They were never in stock during that time. I don't even have an offset BUD, but would have bought a couple "just in case", if they had been available for a reasonable price.

    The information to build one is on the net "somewhere". I've read other's adventures in building them before. I would rather have a pre-built one with true/tested design and performance than to build something that may or may not perform any better than not having an offset scalar.
    I like to shop at Sadoun Satellite Sales

    Dishes: 2 Primestar 75E, 2 Fortec 90cm, 2 10ft, 7.5ft
    Motors: 2 SG2100, SkyJack 24" & 36" actuators
    Movers: 2 VBoxII
    LNB(f)s: Invacom qph-031, Primestar, dual/single ku, BSC621,Geosat dual C-Band, 2 Polarotor, Corotor
    DVB Receivers/cards: 2 Fortec Classic NA, 2 Dreambox 500-s, SatPros DSR-550s, Digiwave DG7000, Lava 3200, Pansat 2500a, Viewsat Ultra, Twinhan 102g
    Analog: Zenith 1000, GI 2400

  3. #3
    New Member Newbie carbras is on a distinguished road
    Join Date
    Nov 2006

    Posts
    3
    Rep Power
    0

    Conical Scalar Ring

    hi everyone,
    anyone can direct me to where i can buy a conical scalar ring for my offset fortec dish?
    thanks.

  4. #4
    New Member Newbie carbras is on a distinguished road
    Join Date
    Nov 2006

    Posts
    3
    Rep Power
    0
    Quote Originally Posted by adamsphoto View Post
    I noticed today that the conical scalar rings have been removed from the Sadoun web site... should we assume that these are gone forever and never to be seen again? If so, please will one of the members here step up to the plate and make some detailed measurements for the one on their dish so I and others can have one made?
    same with me , i purchased one BSC_621 and still waiting for SADOUN AND GAMORA to provide parts they display on their site , saying that it will be available soon, i m waiting for 18 months.

  5. #5
    Member Super Newbie kenglish is on a distinguished road
    Join Date
    Mar 2004

    Location
    Salt Lake City, Utah, USA
    Posts
    38
    Rep Power
    0
    I've also been checking back on the website for them.
    Hey, Sadoun....have we got enough customers for an order yet?
    I'm ready.

  6. #6
    Member Super Newbie gremlin411 is on a distinguished road gremlin411's Avatar
    Join Date
    Jan 2008

    Location
    Texas
    Posts
    35
    Rep Power
    0
    Hey guy's I some filler out there right now I am waiting on a couple of e-mails when I hear something I will let you know.

  7. #7
    Senior Member Wiz BYX is a splendid one to behold BYX is a splendid one to behold BYX is a splendid one to behold BYX is a splendid one to behold BYX is a splendid one to behold BYX is a splendid one to behold
    Join Date
    Feb 2005

    Posts
    346
    Rep Power
    226

    conical scalar ring

    Hey...put me in for one conical scalar ring.

  8. #8
    New Member Newbie PNguyen30328 is on a distinguished road
    Join Date
    May 2007

    Posts
    1
    Rep Power
    0
    I guess the WSKU2C Conical Scalar ring is back in stock @ sadoun: Aluminum Conical Scalar Ring Kit WS-KU2C. I bought one of these about 2 weeks ago and compared it against another one that I have and the WSKU2C scalar ring is about 100 times better in quality and performance. Thanks Sadoun!!!!

    I had bought a cheap one a few years ago and it started chipping and deforming in the sun because the quality was so bad and the aluminum was so thin. I guess you get what you pay for. The WSKU2C ring and holder is top quality.

  9. #9
    Member Rising Star StevenS will become famous soon enough StevenS's Avatar
    Join Date
    Oct 2006

    Location
    Columbus, Ohio
    Posts
    147
    Rep Power
    140
    Conical scaler rings are back in stock.
    Best regards
    Steve, CTS
    www.sadoun.com
    1-888-519-9595

    Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the company.

  10. #10
    Senior Member Wiz William Eng is a jewel in the rough William Eng is a jewel in the rough William Eng is a jewel in the rough William Eng is a jewel in the rough William Eng's Avatar
    Join Date
    Jun 2006

    Posts
    436
    Rep Power
    183

    Please let us know how the cone work

    If there are any users other there that have put on the cone, can you please post how much more signal you get with and without the cone. Another words, is it worth the $60? I only got one C band channel with the regular flat scalar ring with my 120 cm.
    Sadoun's M1 package

    80 cm Fortec dish, Invacom LNB, SM3D12 Fortec Classic NA receiver.

+ Reply to Thread
Page 1 of 2
1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Similar Threads

  1. Replies: 0
    Last Post: 01-23-2010, 10:51 PM
  2. Lot of 200x RG6 F Connectors Crimp O-Ring Sealant NEW
    By SadounFeeds in forum Sadoun eBay listings
    Replies: 0
    Last Post: 01-12-2010, 07:20 AM
  3. Lot of 2500x RG6 F Connectors Crimp O-Ring Sealant NEW
    By SadounFeeds in forum Sadoun eBay listings
    Replies: 0
    Last Post: 04-15-2009, 11:40 PM
  4. I need help adjusting a scalar ring
    By ayelvington in forum Installation Help Requests
    Replies: 5
    Last Post: 10-14-2008, 03:53 PM
  5. Scalar ring
    By gremlin411 in forum Installation Help Requests
    Replies: 1
    Last Post: 05-12-2008, 10:09 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Content Relevant URLs by vBSEO 3.5.0