I have a 4 X Diseqc switch connected to four Dishes with single LNB,s ,linked up to one receiver.
Is it possible to link up my 3 other receivers through a multiswitch with the above ,to enable me to view programmes from the four dishes independently.
I have a 4 X Diseqc switch connected to four Dishes with single LNB,s ,linked up to one receiver.
Is it possible to link up my 3 other receivers through a multiswitch with the above ,to enable me to view programmes from the four dishes independently.
No wa, you have SINGLE lnbs!
__________________
*german citizen behind the horizon*
Ok, you make it look too easy... sending them to the diagram. Isn't there some complicated setting up to do in the receivers as well to define each of the 4 LNBs to use?
__________________
Location: Northern Virginia 39.1N, 77.7W
Receiver: Mercury II
Dish: Fortec 31" (In search of something bigger)
Motor: SG2100
TV: LG32D
DVD: LG DVD Recorder
Ok, you make it look too easy... sending them to the diagram. Isn't there some complicated setting up to do in the receivers as well to define each of the 4 LNBs to use?
nothing special to set up in the receiver except for what port in the disqec switch each lnb and dish is on. as Maud'Dib said you will need a dual output lnbf on each dish to make it work.
__________________
Rainman's Equipment
Undien 4600,DSR 922
Fortec Ultra, Satworks 3618
2 Fortec Mercury II
Fortec Classic NA
8.5' Orbitron polar C Ku dish
8.5' Birdview HH C Ku dish
100cm Fortec dish
90cm Fortec dish
2 DG-240 HH motors
Co Rotor II feed horn
Norsat 8515 C band lnb
Norsat 4506A Ku lnb
BSC-621-2 Lnbf
Invacom QPH-031 Lnbf
Invacom SNH-031 Lnbf
Fortec Fsku-v universal Lnbf
V-Box
Linear Mode
