Could anyone help me get Vtv 4 channel on SV 1000 receiver ? I used to have it, but i lost them all after doing factory reset...now i wanna do the setting, i don't know how? like:
Your LNB is either standard (10,750 MHz) or universal - you must look at the LNB to tell.
DiSEqC = 0 or 1 unless you have multiple LNBs.
kat
__________________
For as much as I like to help out our members I simply do not have time to answer Private Messages or emails asking about setup and other general issues. Please post your questions in the forums and we will try to help you out. Thanks.
It used to be called Telstar 5 (T5) and then IA5. Look for one of those.
kat
__________________
For as much as I like to help out our members I simply do not have time to answer Private Messages or emails asking about setup and other general issues. Please post your questions in the forums and we will try to help you out. Thanks.
You will need to manually enter the new transponder data into your receiver then scan the channels for VTV4. Also you might need to alter the LNB type to either universal or standard. Check your receiver manual for instructions.
kat
__________________
For as much as I like to help out our members I simply do not have time to answer Private Messages or emails asking about setup and other general issues. Please post your questions in the forums and we will try to help you out. Thanks.
Linear Mode
