G-10 & G-27

wannaknow · #1 (**permalink**) 09-03-2007, 03:11 PM

I`m in east tx. and have a Viewsat Ultra, SG-2100 motor, Fortec 80cm dish,and a Ivacom QPH-031.
I have been able to get 61.5w all the way to 103w using my USALS. But I`ve tried tweeking the dish east and west and up and down, but have been unable to get G-10 or G-27. Does any one think maybe I should try a diffrent LNBF. Or any other suggestions.
Thanks Mike.

wannaknow · #2 (**permalink**) 09-03-2007, 03:13 PM

I`m in east tx. and have a Viewsat Ultra, SG-2100 motor, Fortec 80cm dish,and a Ivacom QPH-031.
I have been able to get 61.5w all the way to 103w using my USALS. But I`ve tried tweeking the dish east and west and up and down, but have been unable to get G-10 or G-27. Does any one think maybe I should try a diffrent LNBF. Or any other suggestions.
Thanks Mike.

teched · #3 (**permalink**) 09-03-2007, 05:03 PM

Do you get 110 and 119 circular?

Are you seeing everything east, but not west, of your "true south"?

xwolfs7 · #4 (**permalink**) 09-03-2007, 05:07 PM

Hi!
I usually look on lyngsat and find a strong tp, I usually pick one like daystar and try and lock onto that tp.
I remember once I did`nt have my dish lined right and changed the setting on the sat where it is 123 I changed it to something like 123.2 or 122.9 see if I could get signal but your best bet is to find a good strong tp usually a Free channel works best for me...good luck...I`m in the west actually I`m at 123.4 so my true south sat is G10

elgemcdlf · #5 (**permalink**) 09-04-2007, 07:59 AM

You are out of alignment. Plot your arc on a piece of paper as to what you are getting and that should create a picture for you as to what you need to adjust.