I hooked up my dn500 and was getting 110w and them mounted it to the house and now all i get is 119w. i am new to all this and thought that if i had 119w then i should get 110w any help
I hooked up my dn500 and was getting 110w and them mounted it to the house and now all i get is 119w. i am new to all this and thought that if i had 119w then i should get 110w any help
Receiver? Types of switches?
__________________
8.5' Mesh Dish w/ C & Ku lnb's & 24" actuator
8.5' Mesh Dish w/ BSC621-2 fixed install for circular C Band on 40.5
Fortec Star 90cm Dish w/ FSKUv lnbf & DMSISG2100
Motorola DSR922
Fortec Mercury II
Digital Stream HD1150.
Typically when you re-set a DNW 500 dish you have to go into the set up menu and run the "check switch" function. Any DNW installer could help or ask DNW at 1888-333-DISH for tech support.
__________________
Best regards
Steve, CTS
www.sadoun.com
1-888-519-9595
Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the company.
I bet he's pulling his hair out looking for the "Check Switch" command on his FTA receiver....
kat
__________________
For as much as I like to help out our members I simply do not have time to answer Private Messages or emails asking about setup and other general issues. Please post your questions in the forums and we will try to help you out. Thanks.
I bet he's pulling his hair out looking for the "Check Switch" command on his FTA receiver....
kat
Do my eyes deceive me? Could it really be? Thought a hunter got you!
__________________
8.5' Mesh Dish w/ C & Ku lnb's & 24" actuator
8.5' Mesh Dish w/ BSC621-2 fixed install for circular C Band on 40.5
Fortec Star 90cm Dish w/ FSKUv lnbf & DMSISG2100
Motorola DSR922
Fortec Mercury II
Digital Stream HD1150.
Do my eyes deceive me? Could it really be? Thought a hunter got you!
Mwahahahaha
Nope - your eyes deceive you not --- The KAT is BACK !!!!
kat
Not too many hunters around my neck of the woods so bobkats are fairly safe.
__________________
For as much as I like to help out our members I simply do not have time to answer Private Messages or emails asking about setup and other general issues. Please post your questions in the forums and we will try to help you out. Thanks.