have 625 and 322 receiver...added dp34 won't work need help

killintyme32 · #1 (**permalink**) 04-07-2006, 04:23 PM

I have a dvr625 and a twin-tuner 322 and recently added a dp34 so that i can add a 5th room to my system. Since installing the dp34, I am unable to get matching "good" check switches from my two receivers. Also, I can get the 2 main tv's to work, but if I turn on one of the extension tv's it knocks the other tv's out (lose signal). Anyone have any suggestions or ideas? I have a DP plus lnb. Thanks.

pictureon · #2 (**permalink**) 04-10-2006, 05:24 AM

By using dp34, you eliminate the switch inside the lnb. With DP 34 you can not separate the feed into 2 tuners. In that case you need 2 lines for each receiver and another one to your other receiver. Total of 5, which would not work with your dp34. What you need is DPP44 switch. You take one line for each dual tuner receiver and separate the feed. The 3rd line you would use it for your fifth room.

killintyme32 · #3 (**permalink**) 04-11-2006, 06:22 PM

Will two DP34 switches work? Thanks!!!

pictureon · #4 (**permalink**) 04-16-2006, 03:45 AM

2 DP34 would work. you need to run one line for each tuner directly from the switch (total of 5)