LNB's

slingblade · #1 (**permalink**) 12-10-2005, 03:20 PM

Will a DishPlus LNB work with a DP 301 013 or a 3800 IRD?

pictureon · #2 (**permalink**) 12-19-2005, 07:18 PM

DPplus is designed to be used with dual tuner receivers. However you can connect one legacy LNB to it and connect it to legacy receiver such as 3800. It should work fin with all other dp receivers (3-digit models) as long as you do not use seperator

thecableguy · #3 (**permalink**) 12-25-2005, 09:27 AM

If you use a DPP twin. It is designed to be compatible with legacy receivers. However one of the receivers will need to be DP to power the lnb. So you can use it but one receiver will need to be dp

quty · #4 (**permalink**) 01-15-2006, 07:44 PM

Anyone knows

1/. What is the spec (i.e. frequency, dB gain, noise, ect.) for the linear LNB on the Superdish? (for both the 105W and 121W, are they 2 different LNBs?)?

2/. What is/are the difference between the linear LNB on the Superdish and the FTA linear LNB?

3/- Could I replace the Superdish linear LNB with the FTA linear LNB? do I need any special mount or just remove one then install the other?

Thanks in advance for your input