dish 1000 and 322 receiver...any pro's like to guide me?

[aminoacid]

I have a 322 receiver, dp34 switch, a separator and fortunately a birdog meter....lets say i got the signals and aiming correct. .... how do i run the cables? 3 cable from lnb's to dp34. ... then what?

[pictureon]

Separator would not work with DP34 so you need to run 2 lines to the 322 and run a wire from TV2 port to the second TV. You also have an option to diplex one wire and connect to second TV by the switch.
separators work with DPP33 and DPP44 and DPP twin lnb's

[aminoacid]

Thanks alot for you help. I ran 2 coax from the dp34 without the separator, ran switch test. After alot of dinking with the system, turns out also the LNB was bad, I'm using the 118.7/119 lnb where the 119 was having issues so I replaced the whole LNB and everything is working fine now.

Thanks a bunch again. Glad to see somebody to offer help and advice to a stranger.
God Bless America and americans!!!