Dish 1000.2 Install Question

mtnest · #1 (**permalink**) 10-02-2007, 10:35 PM

I am interested in installing a dish pro 1000.2 and using it with just one or two receivers. I need to know if i need a "switch" such as the dp44 or can the receivers be hooked directly to the lnb.

If so which connecter on the lnb gets hooked directly to the receivers, all are marked in the instructions as being for specific satalites. (119,110, etc)

When would a in line switch such as the dp44 be needed?

Thanks

dsatellitez · #2 (**permalink**) 10-06-2007, 06:42 PM

No need for a switch.

dsatellitez · #3 (**permalink**) 10-06-2007, 06:44 PM

44 would be needed if you have 4 orbital locations, or multiple locations that cannot be recieved by one dish, the 44 would allow you to combine them.

pictureon · #4 (**permalink**) 10-18-2007, 01:51 AM

Quote:

Originally Posted by dsatellitez

44 would be needed if you have 4 orbital locations, or multiple locations that cannot be recieved by one dish, the 44 would allow you to combine them.

dish 1000.2 supports 4 orbit location 110,119,129 and has an input for 4th lnb from 61.5 or 148