DirectTV Signals

[mdframe]

DirectTV just installed a new dish on my house with the 3 sat LNB. I have been using DirectTv for years and now the new technology is causing me all kinds of headaches. I can get one satellite clearly, 101?, but the other 2 are dead. Can I use the SF-95 to tune the other satellites? Since I did not have to pay anything the tech just came in threw it up and basically left.

I just found this site and love the information I have found so far. I live in Richmond, VA, in case someone needs that information. I don't mind working with the dish and receiver but I don't want to spend lots of $$$ just to tune a couple of satellites. I would just like to know if the SF-95 will meat my needs. I didn't see anything in the description about satellites so I assume you just use the receiver to request test signals for each satellite then use the meter to tune it. Please let me know if I am incorrect.

Thanks,

Matt

[ronh]

Hi,

Noticed your post and was wondering if you have it resolved yet? If not, itmay be a simple configuration of your receiver to recognize the other satellites. The installer really should have checked that before he left.

Regards,

Ron

[avex_vu]

make sure its check for triple lnb dish