Combining sat lnb's with OTA antenna with 1020 card

peeps97654321 · #1 (**permalink**) 09-15-2003, 02:11 PM

I am planning to purchase the Twinhan 1020 card and have a question about wiring/switching. I have a BUD with a KU/C-band LNB and a separate 18" Dish with a single LNB. What I want to do is combine my OTA UHF antenna with the satellite LNB's using a diplexer so that I can use a single RG6 to my computer where I can install another Diplexer and run the UHF signals to my MyHD card and the other to the 1020 card. Since I will be using a DiSEqc switch for the 3 LNB's, will the Diplexer cause any issues with the DiSEqc switch? or should this be fine?

Thanks.

peeps97654321 · #2 (**permalink**) 09-15-2003, 11:28 PM

Anyone?

swampthang7 · #3 (**permalink**) 08-07-2004, 09:49 AM

peeps;...I think it will diplex ok and give you UHF,but not sure if the quality will be there.

walkendadogyabe · #4 (**permalink**) 08-08-2004, 04:47 AM

I also am diplexing my signal and would like to know how a Disqec switch will work so if you do it please post your results

swampthang7 · #5 (**permalink**) 08-08-2004, 08:17 AM

walken;you can diplex after the disecq and still pull the signal out ,no problem.just did it recently.

walkendadogyabe · #6 (**permalink**) 08-08-2004, 01:21 PM

Thanks Swamp. Glad to hear that.