Vertical Transponders

[sookie]

I must have hit the wrong key and deleted last post for this problem, so again:

I cannot receive any signal or channels on the vertical transponders. I have tried two different satellites. (91&119) with same results. I have a signal of approx.73% and quality on the horizontal transponders in high 40s vertical transponders 0
Have tried four different DVB Programs --- same result
Watching Horizontal channels perfectly but missing all channels I want from the Vertical Transponders

I have hooked up two different brands of satellite receivers to this same line and dish and have received all channels???both H & V

Equipment:

VP-1020a latest drivers
Dss 18" dish and single lnb
New RJ6 cabling and connectors
Amd 2500 with 512M ram
Windows xp Pro w/SP2

[vj9999]

I haven't done anything with your posts, but my guess would be that you are talking about "watching" channels on these satellites and that is a red flag. Read the rules. Any illegal discussion is not allowed and posts will get deleted. These satellites only have few FTA promo channels and some radio stations.

Thanks.

[bobkat]

Actually vj, I deleted the previous post. If forum members don't read the rules prior to posting I just hit DELETE first...ask questions later.

kat

[sookie]

Please accept my appoliges for my ignorance.
This problem is driving me a little nuts. ops:

[tata1]

Hi.I have problems with vertical transponders,recieve no signal,I can watch H transponders,I use a vision plus 1020A and my theater program,can somebody help me.

[bobkat]

Originally Posted by tata1

Hi.I have problems with vertical transponders,recieve no signal,I can watch H transponders,I use a vision plus 1020A and my theater program,can somebody help me.

Check your cable connections to make sure they are all tight and not shorting out anywhere; make sure you don't have splitters on the cable from the dish; try changing your LNB.

kat

[harolds]

sookie,

Did you figure out what was wrong, because I am having the same problem.