VisionDTV favorites list drives motor to wrong spot

[dss_diehard]

I'm getting VisionDTV to scan G3C, T5, G13 etc. so I save the channels I like to the favorites list and when I go watch tv and change channels it says "driving motor, please wait" then I get the "setting error" garbage.

So I go up to the roof to double check and sure enough the motor stopped at the wrong spot. For instance, I'm at -75 degrees which is NE PA and using USALS G3C goes to 22 degrees and T5 is only 2 degrees west.

What I found on the roof is it stopped at 46 degrees!!! I think it added the whole 24 to the 22 instead of just 2. So I have to manually goback to 0 degrees and drive the motor again manually using the "goto" function.

For VisionDTV to change sats automatically/correctly in the favorites list, should the settings be USALS or DiSEqC 1.2 or fixed or is it some other setting problem?

Thanks gang.