HELP with GALAXY 10R

[FROST]

Could someone please tell me the exact steps to take in obtaining the Korean channels on Galaxy 10.

I know the values have changed :

Frequency 11951
Symbol Rate 13846
FEC 2/3

The receiver I have is a BEC 6600+

I use to have the channels before the change, and now all channels show up as NO SIGNAL.

I have inputed the values in but notice that I am not able to catch the signal at all. It should be yellow but it maintains a constant white color. I have not touched or moved the dish physically at all, and am wondering if that is what needs to be done.

I have read other ppl's posts and some are able to lock onto the signal with simply inputing the values, but I'm having zero luck. PLEASE if someone could give me step by step instructions based on the DEC 6600+ model reciever I have.

[hunterdave99]

I use a FortecStar 786 receiver.
I did not have to change the antenna position at all. I was still receiving the other channels on G10R (on other transponders) just fine. Just not getting the Korean channels because they changed the TP info.
First I went the menu scren and entered the Edit Menu.
In there I selected the Satellite/TP Edit screen.
On this screen I selected the satellite (G10R) and hit add.
Then I entered the new transponder data that I got from Lyngsat.
(beforehand I had compared all the transponder data that originally came preprogrammed for G10R in my receiver with the actual TP data from lyngsat and I found that there were 4 or 5 more transponders in use than my receiver had, so I added them as well)
Once I had the new transponders programmed into the receiver then I went back to the main menu.
I went to the install menu and then to the channel search screen.
There I did another channel search on the satellite and it searched the old TPs as well as the new one picking up the new Korean stations as it went along.
I did nothing to the old TP info in the receiver. Just in case somebody else comes along and uses that transponder on the satellite, its data is stored and will always search that TP anytime that I do a channel search on that sat.
If you cannot get the Korean channels on that TP I would check that you are at least still getting other channels on other TPs on G10R that way you know that you are locked onto the satellite good.
If you can get other channels, then your antenna positioning should be good and you are just having problems entering the new TP.
I hope that some of this helped.
Dave in San Antonio.

[bobkat]

Hi Guys:

Well; OK - I moved my dish to Galaxy 10R and got the Korean channels with no problem. The coordinates FROST posted above are fine (polarity is Vertical BTW). They work for me on several receivers including a SatCruiser, Ariza and EmTech. Haven't tried a Benjamin yet as all my BECs are out as customer service loaners but I will post results for BEC when I get one back.

The Korean channels I pulled in were (I have no idea what they are as I have never watched them before) but you guys will know:

KBS
SBS
YTN
Wow Sat
ISC

kat