Albanian Dish in NY

[Albodss]

Thank You Sadoun and Thank You all of you my forum friends for the help you give to me,
here is my setup:

http://www.albaniandj.com/julien.htm ( Installing the Dish )

http://www.albaniandj.com/sadoun.htm ( Mount detal Pictures )

DISH= 90cm
Motor= Strong 12"
Positioner= Pansat
Receiver= Globecast :cry:
LNB= Universal Fortec 5.0

[pmb1010]

Originally Posted by Albodss

Thank You Sadoun and Thank You all of you my friends for the help
here is my setup:

http://www.albaniandj.com/julien.htm

DISH= 90cm
Motor= Strong 12"
Positioner= Pansat
Receiver= Globecast :cry:
LNB= Universal Fortec 5.0

Very nice.
Thanks for the comments next to the pics, made me laugh.

[spiderdead]

hi great pics .
one question , where did you get the mount for your dish?
I would like to get one like it. looks like a small version that used to be used for c band.
thanks

[Sadoun]

Albodss

Nice pictures and comments. That is a nice mount to have specially since your Globecast receiver does not support DiSEqC 1.2 or USALS. So I assume you are using a manual positioner to control your motor. What is the rotation range for the motor? How many degrees E/W?

Folks, do you think there is a market for such a motor/mount? I can import these if the market is there. I think these would work nicely on a 1.2m dishes as well.

[spiderdead]

yes , I would buy a mount if you can get them.
It would be great for larger dishes such as 1 meter dish.

[dtsexpert]

Hey,
Check out your PM. I have some questions regarding the polar mount you have.
Thanks,
Michael

Originally Posted by Albodss

Thank You Sadoun and Thank You all of you my friends for the help
here is my setup:

http://www.albaniandj.com/julien.htm

DISH= 90cm
Motor= Strong 12"
Positioner= Pansat
Receiver= Globecast :cry:
LNB= Universal Fortec 5.0

[Albodss]

Today I did some more pictures of my mount do to the request of some forum members.

http://www.albaniandj.com/sadoun.htm

After searching in internet for several months I didn’t find the mount I was looking for. On Octomabr I did a trip in Albania and I bought it there + the actuator strong. Very, very cheap do to the prices in EU! One more time I couldn’t find the same mount here in USA. ( SADOUN I'm going to pm you for the prices of the dilers in Albania )

Y this Mount Albo?
Well my dish is 90cm and is one the place where is a lot of wind, so I need it something strong and stable. I move the dish from GALAXY 10 to ATLANTIC BIRD 1 and is EXACTLY on the top of the signal, so dam precise! :wink: I'm testing already 1 month still dos the same stop.
I'm very hapy 8)

SADOUN you need to have in your store MANUAL POSITIONER like the one I have PANSAT. I'm sure you do have connection with PAN dealers so ask from them 10 pcs just for start... just a suggestion.

[spiderdead]

yes , this is the mount we need .
very strong.
please order some for your store.
Diseqc motor is not strong enough

[Sadoun]

Albodss

Super pictures. Thanks for sharing with us. I have seen these mounts and will be importing some for sure.

The best way to control the actuator motor is to have a DiSEqC-to-Std 36V Actuator positioner like the one you see her (but without the Skew Control): http://sadoun.com/Sat/Products/Ebay/...STON-DS200.htm

That way, the receiver will still utilize its DiSEqC commands to move the dish.

I will put a package together soon and post it on our website.

Price will be compatible with an HH100 motor or such.

Any buyers?

[spiderdead]

nice.
I will buy

[kvasho]

Can you guys help out please?

I bought also universal lnb. What is the setting on the globecast dish?

Elevation (actual elevation)
lnb polarity - i see you have moved the dish instead - can you please post what degree the dish is at?

can you also confirm that the lnb on globecast dish is set at 0 degrees.

Please help out since globecast is only dish i have!

Thank You

[Albodss]

First asnwer this quetion for me:

What kind of receiver you have?
What kinde of Satellite/Channel you whane receive?
Where are you East cost or West cost?


This dish is set to Atlantic Bird 1

[kvasho]

I have globecast receiver,

I have Globecast Dish

Please let me make really easy for you!! I was able to lock into this satellite with signal strength of 86 percent.

Here is the question i have for you: Does this albanian channel broadcast 24 hours a day? I am in Maryland and right now is 4:50 pm eastern time and i get TvKlan on my receiver but there is no picture. Signal Quality is 86 percent.

Can you help me out? I am also from albania - can you pm me your phone number? Probably the best way to solve this is via a phone call

[spiderdead]

please Sadoun give us an update on when you will get those polar mounts in.
thanks

[takoulis]

Originally Posted by Sadoun

Albodss

Super pictures. Thanks for sharing with us. I have seen these mounts and will be importing some for sure.

The best way to control the actuator motor is to have a DiSEqC-to-Std 36V Actuator positioner like the one you see her (but without the Skew Control): http://sadoun.com/Sat/Products/Ebay/...STON-DS200.htm

That way, the receiver will still utilize its DiSEqC commands to move the dish.

I will put a package together soon and post it on our website.

Price will be compatible with an HH100 motor or such.

Any buyers?

I did purchase such a mount from Jaeger industrial in Taiwan they did ship it to me here in the states. This one is even better the actuator motor is DisEQC 1.2 you do not need a 36v dish mover.Model is Geotrack DG-100 and is good for up 1.2 meter dish,check out there web site at jaeger.com.tw/ I did not get a chance to jnstall it yet

[spiderdead]

How much was it? what did it cost to get it here?

[takoulis]

The price was $45.00 and add another $28.00 for shiping.This is for the polar mount and DISeq actuator,arm purchased directly from the manufacturer.they will ship via DHL international and if you only order one piece ther are no customs charges involved they list order as sample.Go on their web site and email their sales dept they will take care of the rest, pictures of the products they mfg. are all there also.They accept credit card transactions only.

[spiderdead]

great,
what is the web address?

[takoulis]

web adress was on my originall post it is jaeger.com.tw/