try 11966 horz. sr 22000.
I have had 2 receivers on VTV4 for some time. The wind moved my dish and had to reset it. I am getting many transponders on IA5 but get no signal to freq 11966 where the VTV4 is. I have checked all my settings and they seem right. I am set for normal LNB, freq 11966, 20k sym rate, Horizontal, but get no signal. When I do Sat scan I get lots of channels, but nothing from freq 11966. Hope someone can help cause this is frustrating. Can someone tell me if there is a setting I have wrong so I can correct and get the Mrs happy again. Help would be greatly appreciated.
try 11966 horz. sr 22000.
Rainman's Equipment
Undien 4600,DSR 922, Fortec Ultra, Satworks 3618, Sathawk pvr 800
2 Fortec Mercury II, Fortec Classic NA, DVB World USB 2104D
8.5' Orbitron polar C Ku dish, 8.5' Birdview HH C Ku dish
100cm Fortec dish, 90cm Fortec dish
2 DG-240 HH motors, Co Rotor II feed horn
Norsat 8515 C band lnb, Norsat 4506A Ku lnb
BSC-621-2 Lnbf, Invacom QPH-031 Lnbf
Invacom SNH-031 Lnbf, Fortec Fsku-v universal Lnbf
V-Box, G-box
I Like To Shop at Sadoun Satellite Sales.www.sadoun.com
Try scanning only that transponder rather than a full satellite scan. If that doesn't work try manually entering the VPID and APID (3105 and 3106).
Remember that the 11966 transponder is weaker than others - you might need to tweak your dish.
Also make sure the FEC is 3/4 or AUTO.
kat
For as much as I like to help out our members I simply do not have time to answer Private Messages or emails asking about setup and other general issues. Please post your questions in the forums and we will try to help you out. Thanks.
This wasy mistake. I had the Symbol rate wrong. I had 20000 rate and should have been 22000. As soon as I changed it I got everything on the TP. Thanks for responses.
There are currently 1 users browsing this thread. (0 members and 1 guests)