PDA

View Full Version : Moteck Digipower

Pages : [1] 2
  1. Motor install project a disaster
  2. SG 2100 setup help
  3. I just can't get the WHOLE darn arc!
  4. about 33" dish and sg2100 motor?
  5. rotation speed of Satcontrol motor
  6. m-1 motor
  7. Very low Quality (Below 10%) and signal Strength between 55%
  8. Help with SG2100A
  9. please help install with SG2100 motor
  10. Sg2100 positioner
  11. Help hooking up my sg2100 motor
  12. sg2100
  13. trouble with SG2100
  14. trouble with Ultra and Sg2100
  15. why reset not working SG2100A
  16. Fortec 90cm and SG-2100 Motor
  17. coolsat 4000 pro + sg2100 motor
  18. HH motor with DVB card
  19. hh90 motor moves too far with each command
  20. TRUE SOUTH SAT
  21. SG2100 MOTOR: can only get 119W and 110W.Other sats?
  22. SG-2100 Location
  23. GeoSatPro motor with Winegard 76cm dish?
  24. Installing 90 cm Fortec Star with Moteck SG-2100 motor
  25. Need help in fine tuning HH motor to get stronger signals
  26. Installing Motorized System
  27. SG2100 Arc Problems
  28. SG2100 (40-DecAngle) or (30-DecAngle)?
  29. SG2100 and dish size
  30. Moteck SG2100 & V-BOX II are now sold at Sadoun
  31. Dish clamp location on rotor shaft
  32. setting usals reference position
  33. True South Help
  34. SG2100 Out Of Range USALS
  35. Moteck Digipower SG2100 and FORTEC STAR FC120CM
  36. SG2100 will not work with a FORTEC STAR FC120CM dish
  37. V-Box II issue, only 23 positions available
  38. Sadoun Digipower SG2100 Problem
  39. Digipower SG2100 only moving halfway?
  40. Dreambox setup with Moteck SG2100
  41. SG2100- Looses position 0
  42. question about Universal Mount - UNIVMOUNT I
  43. My sg 2100 has play/could the gears be bad?
  44. SG 2100 is not Moving
  45. Need help seting SG2100 elevation
  46. sg2100 motor
  47. Can the SG 2100 be mounted upside down?
  48. Does SG2100 USALS compatible?
  49. motec sg2100 setting lattitude help please
  50. Sg2100
  51. true south setup dont get
  52. sbs skew seting ?
  53. LED in motor off?
  54. bracket to hold Channel Master anthena 1.1m to SG 2100
  55. How Does USALS and DISQeS 1.2 make the Motec 2100 work?
  56. What I learned and a question about the sg2100
  57. One Motor For Two Boxes
  58. SG2100 Plus DiSEqC motor
  59. SG2100 setup question
  60. I have a setup question and need help.
  61. Some More Help please
  62. 75?EAST ~ 75?WEST ( 150? ) Adjustable
  63. H180
  64. What is max dish+lnb weight rotor SG2100 can handle?
  65. H180
  66. HH180 Moteck
  67. SG2100 reference point of "0" off by few degrees
  68. dg240 motor compatability
  69. Newbie Sg 2100 stalled
  70. SG2100 install