- How big a dish?
- What's My Optimum Motorized Dish Elevation?
- How can I set a new frequency for Mercury II
- Satellite Footprints
- Perfect Vision SDC5401
- Radio channel 20500
- Multiple LNB's for Telstar and Hispasat
- Perfect Vision SDC5401
- Motor's voltage, limit switches for special project
- extreme veiw maggnum xv3300 how to add other satellitte such as 83 west
- birddog 3.0
- Have Ku System Need C-Band
- Sat channels during scanning
- Steerable Beam
- Help with switches
- Handy Dandy Compass Extender
- Problems USALS at 15W
- Questions about a new install
- newbe pointing
- FTA between 22W and 61.5W
- Estrella do Sul at 63W
- MBBS in Ukraine
- Adding Satellites to Reciever
- what will surprise me the most about FTA
- Cant wait for the fun to begin
- Which Dish
- How-To video
- Connect 10' mesh dish and 90cm dish
- New to FTA, need some help choosing equip
- Sat Meter Signals - but no transponders
- What Programs Are On FTA
- GEOSATpro
- Help please..10 foot dish and Coolsat 5000
- Is there a best fta sat?
- What is needed to install AU9 SL5 SWM to HR21-700?
- Andrew 1.0M-2 Dish now what?
- Transponder info in Merc 2 Software
- Sale / trade forum?
- Deleting satellites from Fortec Star
- system recommendation please
- Need to know.
- signal 40% quality 0% M-1 motorized
- I Need Help With Fortec Star .................
- no channel problem
- Sadoun sat dish motor Satracker model 38W
- no power to motor and other noob question
- motorized dish planning help
- US TV Abroad (Latin America)
- C and Ku band
- Have a Birddog 2.5 that won't go into program mode?
- Help?
- Please answer my questions ?
- Solar Outages
- MDU Help
- maharshi open university
- 6 foot fortecstar dish help
- Back Again
- Need an Installer for Parkersburg, WV 26104
- Adding 4th satellite to 1000.4 setup
- Galaxy 19, 25 At 97w
- Using dialup modem
- Help Needed
- all chanels are scamble
- Dish Pointing and reception
- Steerable Beam Broadcasting
- Lyngsat listings with "inc. x degrees"
- Setting elevation angle for SG2100
- Maybe this is a stupid question...
- HI to ALL
- help