Available Arabic channels in the USA

[Sadoun]

Here is the recommended system to watch this and more than 100 FTA channels on IA5.

Buy in Bundle
& Save.

Click here to learn more or to order this system

[Admin]

Sadoun ad in Al Fajr

[Sadoun]

Hi fellow Arab-American friends.

News from the Middle East is very dynamic and you never know what to expect from one hour to another.

2M Maroc, Syrian TV, and Al Jazeera International News (in English) have been popular lately. As events develop and a potential confrontation between the West and Iran developing, we are experiencing increasing demand for satellite systems within the Iranian & Arab American communities. With over 20+ Arabic TV channels available FTA in the USA, it is a popular system.

If you are active on some of the online Arabic Forums and Discusson boards, I would appreciate it if you can mention our website.

Arabic SATELLITE TV Channels from the Middle East

Also, if you think it is worth advertising on those boards, let me know by sending me a PM.

[hanoos]

wonder if 15 W, would be available to anyone in USA?

Lyngsat's latest update shows "Al Hayat on Telstar 12"...

and by going there .. To Telstar 12 link:
Telstar 12 at 15.0°W - LyngSat .. it says there: "Telstar 12 at 15.0°W"

...
Al Hayat, mentioned above shows FTA there.. along with many other channels on various TPs there.. many more arabic channels, some chinese, some greek, etc..

Not sure if or who can get T12 though in N.America...
Check it out anyhow...

Can any expert inform if we can pick up telestar12 15w in the USA?

If yes which dish is recommended.

Thanks

[rainman]

Can any expert inform if we can pick up telestar12 15w in the USA?

If yes which dish is recommended.

Thanks

you would have to be on the east coast for any chance at all.

[hanoos]

you would have to be on the east coast for any chance at all.

Im in NY

which Dish would be recommended/?

Thanks

[rainman]

Im in NY

which Dish would be recommended/?

Thanks

by lyngsat footprints should be able to receive it with a 90cm dish.

[Darkman]

i could be wrong ..but i thought even living on the East coast there you need a bigger dish than 90 cm to receive, say, that 15 W, etc

[rainman]

i could be wrong ..but i thought even living on the East coast there you need a bigger dish than 90 cm to receive, say, that 15 W, etc

I was going by lyngsats footprints DM. I would think you would need a bigger dish also. actually I bumped the size a bit they were saying a 70cm dish.

[chouxsadoun]

[QUOTE=pictureon;35408]

Hi All,

I have a Samsung Digital Receiver DSB-4700F, and pointing the dish to InteAmerica5. I have most all the Arabic channels including 2M, except the other Moroccan Channel: Almaghribia. I had it before, someone who install it for me enter some frequencies to get it, but now I have done the installation again, but I lost it and seems that I can't get it back.

Can someone tell me exactly what I need to do in order to get that channel back.

Cheers!

Thank you..[/quote=Elmajed]

Press Menu, Go to installation, Enter password, Go to manual scan, scroll down to the second line and press the right arrow until you see NEW. Go down to the third line and enter 11789 using your remote. Go down one more line (SR)and enter 25000. Down to polarity and leave it at Vertical. Press OK. One the receiver done scanning press ok again. Exit the menu and look for the channel.

Hi, I have the same problem as El majeed. I followed you advise shown below:<<Press Menu, Go to installation, Enter password, Go to manual scan, scroll down to the second line and press the right arrow until you see NEW. Go down to the third line and enter 11789 using your remote. Go down one more line (SR)and enter 25000. Down to polarity and leave it at Vertical. Press OK. One the receiver done scanning press ok again. Exit the menu and look for the channel.>>
The last step One the receiver done scaning , pressOK: The receiver never stops scaning, it just stays fluctuating between 30 and 40% at signal strength. Also, I see motor Status: stop ??
Could you help with this problem?
Thanks
Jay