More Arabic channels on Hispasat 1C (30 west)

[Sadoun]

If you are looking for more Arabic channels, Hispasat 1C (30 W) has a few more channels availble, including some not available on Telstar 5.

This satellite is reachable from the East part of the USA.

http://www.lyngsat.com/hispa1c.html

BTW www.lyngsat.com is a nice website to check what is available on satellite.

[abas18]

If you are looking for more Arabic channels, Hispasat 1C (30 W) has a few more channels availble, including some not available on Telstar 5.

This satellite is reachable from the East part of the USA

hi i live in michigan state, doees thatt meean i can be able to get this satellitee, please let me know. and do i neeed a motor tto get it?? thanks
abas

[vj9999]

abas18. I am in Illinois and Hispasat comes in very strong. I don't have any interest in these channels, but Hispasat ca be a fun satellite to kee na eye on.

One thing to keep in mind is that these channels are in PAL and the picture will appear a little cut of and somethimes jumpy because of a different frame rate.

[abas18]

abas18. I am in Illinois and Hispasat comes in very strong. I don't have any interest in these channels, but Hispasat ca be a fun satellite to kee na eye on

.

thats a good news for me,and i only waant this chaannel cuzz i have interested ffor it hehe, i know the channelsx, but now so how about do i go on hookin it up, or getting thaat satlite, i am on telstar 5
thnk u

[Admin]

Just get another DISH/LNBF (see items 1 and 10 here) and a 2-way DiSEqC Switch to connect your two dishes to the receiver.

If you have anu further question, post them here =D>

[abas18]

Do i need another dish, can't i just do it with the one i have, i don;t mind lloosing telsttar5 if i can get hispanic sat

i just need alittle help on how to go on about that especially with my receiver, its sat cruiser 101, and i went through the list of satlites on there, and hispanic sat is not there, so i am worried how ii would seaarch for that??or sccan for that

[Sadoun]

Abas

Yes of course you can use your existing DISH. It is simple. Just go here and calculate the new azimuth, Elevation, and LNBF Skew.

Move your dish in that direction. In your receiver, got to:
Setup>>Installation>>TP Configuration>>

Since you don't have HISPASAT, just scroll down to ADD and click OK
This will allow you to enter a new transponder frequency,Polarity,and Symbol rate.

Enter 12132 V 27500 (this is the transponder that has all the Arabic channels on Hispasat)

Now, adjust your dish slightly until you see the signal and quality show up.

Scan the satellite to load the channels.

Good luck.

=D>

[abas18]

Thanks soudon, but the link you provided me, does not have, hispanic sat, so which satlite should i select??

thanks, by the way this is for calculationg my elevations and azimuth , thanks in advance

[vj9999]

You can enter 30 in the box under the satellite list. Hispasat is located at 30 degrees west.

[abas18]

I thoughts so , thanks i will ttry it now
abas