Thanks for the reply.
HH90 is probably too light duty for my 95cm dish. In fact, my dealer told me that none of the
Stab HH series are recommended for this dish size. He also said that warranties are no longer being honored by Stab when this size dish is used.
Seems to me there should be a way to "trick" the motor by setting the (south) azimuth reference to a more westerly position - like maybe 200 degrees. Then using Diseqc 1.2, re-program receiver to think that 200 is really 180 south. Granted, you would give something up on the easterly side of the range but that may be an acceptable compromise for some of us. Also, USALS wouldn't work using such a "trick"!
I was hoping that some of the motor experts here could tell me if such a scheme might be possible.
Best Dick