[tangoextreme]

Here is my set up:

Eight LNBFs are connected to two DiSEqC 4ways and a 22KHz switch. The receiver is Pansat 330A which has support for both DiSEqC and 22KHz switch.

I was able to received 4 satellites with a 22KHz is OFF. However, no siganls for other 4 satellites with the 22KHz switch was ON.

I tested the two DiSEqC switches and the 22KHz switch(ON and OFF) individually. All the switches were fine and were able to picked up signals.
No RG6 cables problem.

Any suggestions to fix my set up? :roll: