Dnguyen1,
Just to make sure, cause I had to ask Sadound about this. You say you have a
SG2100, which means that the rotating pole is facing
DOWNWARD and dish attached to it. See
Sadouns products & then the example:
http://sadoun.com/Sat/Order/Motors.htm LOOK for the SG2100 PICTURE
http://sadoun.com/Sat/Installation/H...stallation.htm see picture #4. this is a SG2100 mount picture:
I have a
HH100 and the rotating pole faces
UPWARD and dish attached, but for a moment while putting all the parts together I almost put it facing down like the Sg2100.
Have A Good Day.
p.s. when your rotating the positioner millimeter, by millimeter its best to have the receiver and a small tv up on the roof with you. It makes it a lot easier. I took me 1:45 hours to find T5, but it was millimeter, by millimeter,then the signal hit and I then started to adjust the elevation on the dish also. I can get frustrating, but I just took a pack of cigs and the tv/receiver very early in the morning, right before the heavy sun came out. 8)
art :wink: