Quote:
|
Originally Posted by highandmighty
so that I can program the sat in the 920? How would analog ku work with the 920 and the 30" dish and lnbf? Would I just get on sbs6 via 1020a then channel up and down in the 920? Or will I have to use opt 6778 to manually tune the frequency of the channel to get anything? For example on X4 I get all the dig channels but nothing on the analog channels. Thanks for your input. It is much apprecieted.  |
What you can do is add a SBS-6 as a sat on the 920. Use option 6,4,4 and select B6 to add SBS-6. This will install SBS-6 in the 920 and provide you with the correct transponder polarities and freq's for the channels. Then use the 1020a to move the dish to SBS-6 and then change the channels on the 920. This should get you some analog feeds. All analog channels are numbers below 100. In the mornings during the week you can usaually find atleast a coulple of news feeds. One thing you might want to do if you haven't is to setup the 920 to step mode so it will do all channels of the same polarity first before doing the opposite polarity as I assume you are using the 1020a to contol polarity. Hope this makes sense. You might also check out 4dtvforums if you haven't already.