The receiver will save the channels automatically.
If no channels are showing up after the scan then one of three things is wrong:
1) You have scanned one transponder only rather than the whole satellite.
2) You have selected "CAS" only rather than "FTA + CAS"; you want FTA channels.
3) You have scanned a transponder with no FTA channels on it.
Here is a link to what is available on T5; the active transponders are those that have yellow "DVB" colors contained in the listing, such as "12,152" and "12,177" in the left hand "Frequency" column.
--->
http://www.lyngsat.com/ia5.html
kat