Below is the instruction of how to add new transponders for the Lifetime. I can't confirm if they are exact steps for the Ultra since I don't have the Ultra. As I know, the OSD of both Lifetime and Ultra are pretty much the same:
Menu,
installation, edit TP/Sat, check Telstar5 Ku or
IA5/KU, Edit TP, New.
You can get the freq/Pol/SR at:
http://www.lyngsat.com/ia5.html
Freq for KU is 5 digits, example:
TP 1U, Freq 11749, Pol V, SR 7232.
Michael
Quote:
|
Originally Posted by asuli001
I just purchased a lifetime ultra with 36" antenna (no motor). I have the antenna setup and getting good quality signal using signal meter. Somehow I managed to wipe out all the transponder info for T5 (I did a TP scan before I had the antenna setup correctly). Now I can't find any channels. I obviously need to put in the correct TP info before I scan for channels.
Question: How do I enter the correct TP settings (Freq, S/R, and direction) into the lifetime ultra?
Any help will be very much appreciated.
Thanks,
Ayoub
|