I am a bit loss about your setup. Can you tell us why you want 4 outputs of the DSS lnbf? If you still plan to use the mutiswitch, you can connect the dual DSS lnbf to the
multiswitch, one output of the multiswitch to port1 of the
Diseqc switch. Expect the signal degraded since you have 2 switches installed.
Michael
Quote:
|
Originally Posted by relativityt
So what your saying is connect one output of the DSS LNB to Port 2 of the DISeqC Switch. The Linear LNB to the PORT 1 of the switch then output to the motor connection, which is then connected to the receiver via a single cable?
The problem is doesn't a multiswitch need both (dual) outputs of the DSS dual LNB? I'll only have one available since the other will be plugged into the Diseqc switch.
:?:
|