[quote="dtsexpert"]Have you read the instruction of how to set up h-h mount. If not, please spend some time to read it:
http://www.sadoun.com/Sat/Installati...stallation.htm
Did you read my post???????????????????? I have read and discussed it with your tech line 3 times. :?
Your truesouth sat is AMC5 at 79W:
http://www.lyngsat.com/amc5.shtml
Thank you, this gives me a starting point :wink:
1. Set your mount/dish elevation.
hh120 to 37
dish is at 20 (I tried 24, get better signal at 20)
2. Set skew at 0
yep
3. Go to menu, make sure the lnbf LO is set as "universal"
yep
4. Go to AMC5, pick a transponder. Remember to pick a active ones when tuning the dish at AMC5. Few active ones are:
11742 V 11110
yep
5. The azimuth of your truesouth is 180 +/- magnetic deviation. Check out the link below for magnetic deviation value:
http://www.sadoun.com/Sat/Installati...Calculator.htm
yep, about 187
6. Aim the dish towards AMC5 direction, move the whole mount left/right. If elevation needs to be adjust, only adjust the DISH elevation.
yep got a signal meter from Radio Shark and the thing pegs out but still 0, no, nadda quality :x
7. Once you get lock on AMC5, try to maximize the signal quality.
not happening
Things end here. I can get a max signal of 72 and 0 quality. :twisted:
I am loosing it!! A month now and no results, my kingdom for an
installer to fix this thing!!