There are 2 deg differences between your long and AMC5. Use USALS to move the dish to AMC5, then try to get lock on it. Make sure you set up the LO correctly and use active transponders on AMC5 when tuning the dish.
Some SG 2100 is not USALS compatible. When you use USALS to move the dish to AMC5, you should see the dish move towards the WEST slightly. My
SG2100 in one the non-USALS compatible.
Good luck,
Michael
Quote:
|
Originally Posted by Skelp
Thanks bob, the dish is a winegard 76 CM... should be big enough shouldn't it? Oh. and I have an SG-2100 motor on it.
Oh and I forgot to ask this as well....
OK for the motor to work proper with USALS.. should I point the dish at True South or at the Closest bird totrue south? I'm at 77w and the AMC5 is at 79W.... to make sure it aims proper with USALS which should I set the 0 position at and aim the dish to? |