[tredgs]

I have a Channel Master 1M dish with the standard Channel Master Single Linear Feed and LNB. There is a scale and arrow on the feed with the arrow at ) degrees and the scale going plus or minus 40 degrees each side. Should the LNB be Verticle or Horizontal at that 0 mark arrow? The calculator says the Polorization / Skew tilt for my location is 23 degrees. Does that mean that if I want Horizontal transponder channels I should start with the rectangular opening in the LNB at the 180 degree horizontal degree position, then turn it clockwise an additional 23 degrees? Thanks for your help. I have not been able to find a clear explanation of how to set the Skew and how to change from Horizontal to Verticle on a single feed / single LNB. I assume I just turn the feed 90 degrees manually to switch from Horizontal to verticle.