1. Tie the circular lnbf next to the linear lnbf.
2. Install the
Diseqc switch between the lnbfs and h-h mount.
3. Connect lnbfs' output to the diseqc input.
4. Connect diseqc output to h-h mount.
5. Go to the Lifetime setting menu, set up the LO and Diseqc port accodingly to your connection. Example: if linear lnbf is connected to port1 and circular uses port2, setting Diseqc port1 for linear sats, ports2 for DishNEtwork/BellVu sats.
Michael
Quote:
|
Originally Posted by Todd Wiedemann
How do I configure my Lifetime FTA motorized setup to receive this ???
I have a DiSeqC switch (not installed) and a DSS LNBF (not installed)
I've looked at the pictures on the website and just don't get it. Specifically, do I have to edit each and every satellite entry to tell the IRD which LNBF to look at ???
I'd love to listen to these ... best of all ... they are FREE !!  |