[khanlee]

I have a lot of difficulty setting up Coship receiver with a DiSEqc dish. Any input is greatly appreciate.

Coship receiver can store up to 16 antenna positions, but it has a strange way to program the sattelites. In order to move the dish, one has to set up both East and West limits for each antenna, which mean one has to blindly move the dish to East, make sure it past the desired satellite position, set and store the East limit. Then, again, blindly move toward the western end and store the West limit. Once done, (by that time, the dish position is fully lost), one can search for the satellite. This procedure must be repeated for each satellite corresponding with each antenna. Am I wrong or are there any way to get around these dump procedures ?