Man, I have a Triax Unique Multifocus myself and if you have problems with ALPS LNBs (Made in Japan!) then you have set up/installed something wrongly or a bad LNB!!
Besides, ALPS are not made for receiving problematic satellites anyway.
If youhave problems setting up SPAUN equipment then you maybe have bought/set up the wrong components, because their stuff simply works.
Quote:
Originally Posted by Tom0000
Spaun-s equipment has very bad separations and it can not be used in set with 2 or more receivers. I know it because I am owning one spaun 4/1 commited and one 4/1 uncommited switch. The uncommited is working good only if you will not connect to it twins or quads or connects commited switches with big separations.
At this moment I am not beleiving you in your revelations. I will wait the info from you, what in 8/1 is "crappo". I will check it in mine and will verify.
Alps ? I have 1 LNBF alps (finger) and 2 alps with bigger back body (olders). I can compare all alps only to LNBFs 10 years old. All alps are "crappo" now.
I can say more , the modern trash LNBFs from unknown manufactures with lying info about 0.1dB noise are better.
This is verified info by me, not the read somewhere presumptions. The ALPS is the worst choice I can imagine now. The more worst can be only using LNBFs from old (10 years or more) dish.
I have one sharp 180A (the newest "finger") and I can say it is noticable worse than inverto (white). The silver inverto has to be more better.
But of course golden interstar should be better than both sharp and inverto. The only problem is with size of its feed.
More info about my dish is here :
SKYsunSAT :: Triax multifeed |