|
pole mount on motor
Ok, I got a new DG280B and when I pulled it out of the box, I didn't see the hole at the top of the pole that allows the dish to mount to it with that bolt I think you are talking about. The more I looked at it the more I realized that the hole was not drilled completely through the tube on the motor. I taped it with the bolt and the paint popped off and the bolt slid through the hole... check that pole, it may just not have had a hole completely bored out...
__________________
VA 39N, 78W, Mercury II, Fortec 31", 36", 72", SG2100, DG-280, H180 (two DSR-922's sitting in a closet and to be the next project) HDTV TV with no pay tv.
|