You can't slave 2 Diseqc switches to each other. If you have more than 4 lnbfs, you can use these combinations below:
1. 2 Diseqc 4 ways, 1 22khz: up to 8 lnbfs.
2. 2 Diseqc 4 ways, 1 0/12v: up to 8 lnbf. YOu need to run 2 cables to your house since the 0/12v need to be place close to the receiver.
3. 2 Diseqc 4 ways, 1 22khz and 1 0/12v: up to 16 lnbfs.
Check out your receiver to see what kind of switch it supports.
H-H mount is a bit tricky to set up, but doable. Most of us here install it by ourself.
Michael
Quote:
|
Originally Posted by SatelliteGuy
Is it possible to Slave more than one Diseqc switch together. Much like the DISHPro Switches can be done with DISH Network. I only have a 4 to 1 Diseqc switch at the moment but was curious if anyone has tried to hook more than one up.
If I was smart i'd just hook up a H-H motor but I have all these old PrimeStar dishes that didn't cost me a thing such a shame not to use them got 4 hooked up now. the neighborhood is now calling me the NASA house. |