I had a dishpro 500 setup with a
Dpp44 switch and all was working okay. I replaced the 500 with the 1000+ dish in the same mounting location. The receiver sees the switch, and all the LNB's, but I'm absolutely stumped in that I can't find the satellites with the 1000+ dish! I find it interesting that the documentation tells me that the 1000+ needs to be pointed 9 degrees further south than the 500 in my SoCal location.
My site has steep terrain to the south and east, but as I indicated, the 500 system was working before I installed the 1000+ dish. Would this make a difference with a 1000+?