Quote:
Originally Posted by BYX
Rainman:
The picture is not my of my actuator, it is one that I copied from SADOUN site.
I'm wondering if that is the recomended position for the bracket or should it go more to the tip or to the motor side.
Please advise.  |
where the bracket is mounted is about normal as long as you receive the arc you are looking for and the motor don't bind up you can mount the bracket about anywhere on the tube. I usaly set my far west sat with a little extra movement then adjust the bracket to receive it then the east sats should fall into place,
__________________
Rainman's Equipment
Undien 4600,DSR 922
Fortec Ultra, Satworks 3618
2 Fortec Mercury II
Fortec Classic NA
8.5' Orbitron polar C Ku dish
8.5' Birdview HH C Ku dish
100cm Fortec dish
90cm Fortec dish
2 DG-240 HH motors
Co Rotor II feed horn
Norsat 8515 C band lnb
Norsat 4506A Ku lnb
BSC-621-2 Lnbf
Invacom QPH-031 Lnbf
Invacom SNH-031 Lnbf
Fortec Fsku-v universal Lnbf
V-Box
I Like To Shop at Sadoun Satellite Sales.www.sadoun.com