|
Jim
verify that you entered your long/latitude correctly in the positioner settings USALS menu. Longitude should be West not East. If you see E, change it to W using the volume up key on the remote.
Also, check your wiring and connectors for loseness. Don't overtighten the f-connectors on the motor. Only hand tightening should be suffecient.
If you use the DiSEqC 1.2 commands does your motor move :?:
__________________
Best regards, Sadoun Satellite Sales
US Sales info: 1-888-519-9595 or, 1-614-529-9560
____________________________________
|