I have a
t55 dish and a viewsat9000 and I am a newbie, what a great combination. I set up my dish and aimed it setting up each lnb seperately 110w/119w/129w got good signal on 110 and 119 and minor signal on 129 hooked up the dise switch and now when I go to port 2 where 110 should be 119 appears in the upper right hand corner. I've already switched switches with the same results. I just ordered an emp centauri switch to see if this solves it. And when I go to port 3 where 129 is I only get a flicker of a signal from 0-12. If I mess around with the lnb high frequency 119 again pops up in the upper right hand corner. I'm using M20r lnb's please anybody with any experience with this setup please help
