|
Install a 22KHz switch at the dishes side and connect the FTA dish to the 22KHz side. The DN dish should be on the 0 side.
Connect the cable to the FTA receiver first. Use the LOOP Out on the FTA receiver to run a cable to the DN receiver. Setup the FTA receiver to send a 22KHz tone when it is ON.
When the FTA receiver is OFF, the switch will go back to 0 position passing the signal between the DN receiver/dish.
I hope it will work for your situation. Let us know.
__________________
Best regards, Sadoun Satellite Sales
US Sales info: 1-888-519-9595 or, 1-614-529-9560
____________________________________
|