[Sadoun]

POSITIONER Moteck V-BOX II

This is an ORIGINAL Motech brand positioner,
Not a cheap imitation.

$49.95
(Regular price $69.99)

• This Moteck VBoxII is used to control your actuator (motor) on your C band dish.
• It takes DiSEqC 1.2 commands from your MPEG2 DVB satellite receiver and converts it into 36V pulse and sensor to store positions - can store 99 Positions.
• It can work as a stand alone positioner or it can accept DiSEqC 1.2 commands from a satellite receiver.
• Controls and displays position.

FEATURE:

• Compatible with DiSEqC 1.0 /1.2 receivers
• Compatible with any Reed Switch Actuator or H-H Mount
• 5V DC Output for Optical Sensor Actuator
• 3 Digit LED Display
• Drive Dish up to 3M
• 99 Satellite Positions
• Fine-tune EAST / WEST Buttons
• Overload Protection ( Auto-recovery )
• Anti-Noise Design
• Remote Control Included
• User's review

Tech Support Forums: http://www.sadoun.net/forums/moteck-digipower/

Specification:
Model V-BOX II
Input 110 VAC / 60Hz
Output 36 VDC
Max. Dish Diameter 3M Max.
Output Current 3.5AMax.
Power Consumption 80W
Protocol DiSEqC 1.0 / 1.2
Positions Memories 99
Controlled by DiSEqC 1.2 Receiver or Included Remote
Control Display 3 Digit LED
Resynchronize Function YES
Manual Buttons Power ON / OFF, EAST / WEST
Protection Software: Limit Protection & Electric Overload Protection