Quote:
Originally Posted by tha19
I just received a Gbox V3000 and tried to hook it up to mu BUD. It moves the dish one click then gives an E-2 message. The instructions don't cover this. Help I have three wires coming from the switch on the dish. Red Black and green. The connected to the analog dish as B, Sensor and Ground. I assume I need to connect the senso and ground to the Gbox |
The G-box V-3000 is a real nice peice, i like it alot, an it is alot nicer than the motecII that i have on another dish set up, so very nice buy Tha you wont be sorry at all when you get it going.
but now getting to your problem, the V-3000 is made to work with a reed switch an you dont have a reed switch. what you got is a optic sensor, an you will either try to rig up a powers supply to run it (5-volts dc is needed) an hope that it is good an working optic. or what i would do is replace it an put a reed in its place with a magnet wheel. that would be easyer an better cause had alot of problems with optic sensors tru out my time...