Quote:
Originally Posted by DBSD53
Rainman, Thanks for the reply. I have tried what you said and still nothing. It does not matter what I do to the Traxis,nothing changes. Does this have anything to do with Mapping in channels? Is there any thing I need to do on the 922? I also called SRL and they could not help me as I expected.
|
Make sure that you have the dsr922 set to Ku-LNB-f, an that you are putting the coax from traxis in the ku-port (lower port on 922). an when the traxis is power off in stand-by mode sud get both polaritys, an if not take the coax off the traxis an put it right on the 922 to try out, an see if they come in.
good luck...
__________________
10-ft Micro-Dine (commercial uplink dish) on polar mount, 7 1/2ft Unimess w/horz to horz motor, 1.5 meter Channel master w/horz to horz motor, 90cm Eagle & Pansat-900 motor
2-DSR-922& 1-HDD-200, Drake 1424 2-Pansat 2500a Sonicview 8000HD
|