|
- take the meter out of the line.
make sure coax goes from LBF to motor to receiver
Make sure the coax goes into the LNBF input on back of receiver (not ANT input)
Using USALS, put motor at "reference" or "zero" position. Make sure your location coordinates are eintered into the receiver.
Align the whole thing to your magnetically corrected south heading using a compass
Now, have the motor drive to your highest "south sat" - it should not move too much
Finally, hunt for quality indication on the reciever, while being tuned to an active transponder.
Have a small TV out by the dish and receiver with short cables while doing this. Moving the dish 1/8" will lose the signal, it is quite touchy as the spot to find is very small.
good luck
__________________
If you feel my post has helped you in any way, please click the "Reputation" icon on upper right of message (looks like a set of scales) and leave me a note! Thanks.
|