[elgemcdlf]

You need to tell the motor to goto 121 or 119 from where you are but 121 has linear beam. I would be going for 121 and tp 12074V20000. Many report the 90cm dish to be off by 5 degrees so if you are finding nothing try raising the dish 1 degree and try again. Might be a lower issue also so choose one direction to go first. I would go as far as 8 degrees from my original setting in 1 degree increments. As stated you need to verify you have your lnbf settings in the receiver correct. The lnbf is turned on, etc.