|
You are tracking an arc not a line. When your motor is at 0 it is at the highest point it will reach. Your true south sat is the highest point in yoru view of the arc. This is part of why you align for true south. Makes the entire process much easier.
__________________
8.5' Mesh Dish w/ C & Ku lnb's & 24" actuator
8.5' Mesh Dish w/ BSC621-2 fixed install for circular C Band on 40.5
Fortec Star 90cm Dish w/ FSKUv lnbf & DMSISG2100
Motorola DSR922
Fortec Mercury II
Digital Stream HD1150.
|