Quote:
Originally Posted by Jim-S
I had just received my Mercury II back from Sadoun on Saturday, it was tested and found OK (another problem). So I did a factory reset and power scanned 3 sat's. AMC3, Galaxy 10R and Galaxy 25. Galaxy 10 was fine AMC3 was fine then I went to Galaxy 25 (IA5) I was going thru the channels and when I hit the last few to view my receiver went nuts. Just like what was described in the above threads. I was ready to call Sadoun and ask them, what did you do to my receiver. Then I remembered this thread. Thank goodness for the forum. I was able to get to menu and do a factory reset and power scan AMC3 but that's all I have done and it works fine. It must be a transponder on G25 doing this I don't know quite what to do. It was very difficult to maneuver thru the menu. I'm going to try what is suggested by Sadoun on 12152H, delete it.
Jim |
jim had the same problem shut down the receiver removed the satt feed rg6 cable powered it back up deleted the channels i did not want reinstall cable powered it up works great no problem vze59zgb
