Quote:
Originally Posted by lumpkin666
You might have better luck getting feedback if you indicate what type of switch (model?) it is that you're using. It sounds like you have something with 4 inputs, but that is not really the standard type of 22k switch. Normally a 22k switch has 2 inputs and 1 output. It sounds more like you have something like a multiswitch. |
Either that, or the 4 lines he's talking about are the 2 linear and 2 circular ports on a
QPH031, and he's confused about how to run 4 lines into only 2 ports on the switch. If this is it, the answer is just run one line from either "L" port, and one line from either "C" port. The 2 unused ports can either be left open, or put on a terminator cap to keep the weather out.