|
Do you have the necessary equipment to check the spectrum for interference? It would seem that if you know that all of the parts are good, and you have some results reading another frequency that maybe something is interfering with the frequency that you're targeting. I doubt it since your l-band frequencies can't be that far apart, and you should see the interference on all frequencies (although you DID indicate a lower than normal power reading on your previous setting). Being that you're on a nuclear reactor site in a less regulated country, who knows what might be radiating through your cables and causing interference!
__________________
I like to shop at Sadoun Satellite Sales
Dishes: 2 Primestar 75E, 2 Fortec 90cm, 2 10ft, 7.5ft
Motors: 2 SG2100, SkyJack 24" & 36" actuators
Movers: 2 VBoxII
LNB(f)s: Invacom qph-031, Primestar, dual/single ku, BSC621,Geosat dual C-Band, 2 Polarotor, Corotor
DVB Receivers/cards: 2 Fortec Classic NA, 2 Dreambox 500-s, SatPros DSR-550s, Digiwave DG7000, Lava 3200, Pansat 2500a, Viewsat Ultra, Twinhan 102g
Analog: Zenith 1000, GI 2400
|