[rainman]

Ok start with your dish and motor set at zero now move the whole assembly to a azimuth setting on your compass of 175 degrees.then set your motor scale on the lat sid to 33.1 degrees.then set your dish elevation to 24.16 degrees on the dish scale. now set your receiver dish positioner to usals.using the receiver move to G3c then adjust the motor and dish as a assembly east and west to find the best signal. the adjust the dish elevation to find the best signal continue between the east and west and dish elevation to you receive the best signal possible once this is done set up another sat usin usals in your receiver then move to it if you got the best signal posilble on your true south sat you should be able to receive the rest of the arc.